How To Clean A Hot Tub Before Filling

It’s almost time to take your first soak in your hot tub. If there are stains or dirt marks on the shell, this is obviously needed, but even if the surface looks clean, it's best to wipe it down as there could be microcontaminants that will start your hot tub experience off on the wrong foot.

Hot Tub Start Up – How To Fill A Hot Tub – Youtube Hot Tub Start Up Tub

Table of Contents

Fill the hot tub with water again and add a special flushing solution to the water.

How to clean a hot tub before filling. How to clean a hot tub before filling.draining the water does two things: When the hot tub is empty, turn off the pump, remove it from the spa, detach the hose, and return it to storage. Pour the suggested amount of pipe cleaner into the filter housing.

I strongly suggest starting this early. Cleaning your sundance hot tub. We don't use damaging chlorine in our tubs.

After draining your hot tub, use a clean soft cloth to wipe the shell and filter compartment down. Before refilling your hot tub, give it a thorough rinse with a hose. Run the jest for the amount of time that it says on the instructions.

Keep in mind you may need to use an actual hot tub filter cleaner if it’s really grimy, or replace the filter if it’s beyond cleaning. Do not use a brush or anything too abrasive on filters. 5 steps to a sparkling clean hot tub 1.

Simply add 250ml of whirlpool rinse to your hot tub water, remove your filters & headrests (pillows) before adding whirlpool rinse, run the jets (pumps) for up to. Clean and flush the hot tub before filling the first thing to do to give you a head start is to make sure that your hot tub is completely clean before you fill it with water. You should drain your hot tub every six months, and this is.

Follow the instructions in your owner’s manual when draining and refilling. Ozonators, ionizators and uv systems also reduce the need to use as many harsh chemicals and if you shower before entering the hot tub and change the water frequently you will need to use less. This is also why it makes sense to always shower before you get into your hot tub.

Before you fill your new spa, wipe down the surface. Remove your hot tub filters. For an extra cleaning step, use hot tub chlorine to disinfect the filters.

While it is tempting to use your favorite cleaning products on your hot tub, all you actually need is water and a little bit of vinegar. You’ll know it’s time if: Andy a cleaning a wooden hot tub is done in the same fashion as a plastic hot tub, with one exception!

Use a spa surface cleaner to wipe down the spa shell before filling it with water. Sponge and gentle cleanser for wiping down the inside of your hot tub. Then follow the how to drain a hot tub procedure above.

If you have a hot tub, purging and changing your water is something that you should do once a year depending on usage. If your filters are new, spray them with water from your garden hose, wipe them with hot tub cleaner and rinse clean. Some filters are easier to reach than others.

A clean hot tub is key to clean, clear water. To really clean your hot tub, it needs to be empty. You want to make sure your spa is clean before putting in the water.

After 15 minutes, carefully wipe down your liner with a spa cleaning mitt. Should you need to physically clean the surfaces within the wood tub use a relative soft scouring pad/sponge. Make sure your jets are on during this time to allow the cleaner to flow through all of the plumbing.

Your spa is getting stinky Filling your hot tub for the first time. Turn your jets on full.

Cleaning your hot tub shell helps maintain the life of your spa and keeps it looking good. How to refill your hot tub. Wipe the spa surface down before filling:

Now that your sundance hot tub is empty, you may want to give it a quick clean. Simply soak your filters in a 50% water and 50% vinegar solution for two hours. After a couple of minutes you should notice a thick foam start to build up on the surface of the water.

Before you begin draining your hot tub water, it is a good idea to use a whirlpool rinse to clean and degrease your hot tubs internal plumbing and prevent calcium build up which can affect the performance of your hot tub. Bear in mind that any dirt, mold or bacteria on the hot tub will enter the water and quickly multiply meaning that you will need to resort to chemical treatments much sooner. This will flush out all of the accumulated gunk from inside the hot tub’s pipework into the water.

Once the water is drained, you can easily inspect and wash the shell’s interior, and remove and clean your spa filters before refilling it. You don’t want to be relaxing in your diluted cleaning products, and equally, they may cause bubbles which will throw off the chemistry of your hot tub water. Hot tub water gets pretty gross and needs replacement more often than pools.

Using harsh cleaning products will result in foamy water when you refill your hot tub. Ok, not exactly breaking news, but it’s true, and you should know how to drain, clean and refill your spa correctly.

71 Modern Luxury 2-person Acrylic Corner Whirlpool Air Massage Bathtub Rectangular 3 Sided Apron Tub Jetted Bath Tubs Freestanding Jetted Tub Jacuzzi Bathtub

Fill the hot tub with water again and add a special flushing solution to the water.

Leave a Reply Cancel reply