In the same area as your water meter. 4, any other meter key, will open your meter box, all the keys are the same.
How to read your water meter having found the water meter chamber, lift the lid of the outer cover (you may need to use a tool like a screwdriver to help you do this) and remove the polystyrene frost cover (if necessary) to see the meter face.
How to open water meter cover uk. How to open water meter cover uk. It should be marked with a w or wm or the word water. Lift out the frost pad.
Most water meters are fitted outside near your outside stop tap. Check that the serial number on your bill matches the one on the meter. The wall cover should loosen up as the screws are removed.
Use a medium sized screwdriver to remove the two screws. I've checked and the distance between the centres of each jaw is 4 inches. Likewise how do you open a water meter with a lid.
If your meter is outside you may need to lift the cover to access it. The screwdriver is to lift the metal cover, which you have done. Sometimes these can be a bit further down the road.
To access your meters, you will first need to remove the center piece called the meter cover lid. The water company has proven unhelpful. Keep close to the load.
Our meter cover looks identical to the one you pictured. The meter is at the far end of the wire. Getting started before you start any checks, you first need to make sure you’re not using any water.
3, a new key costs less then a quid, at a diy store. Apologies for the link but can't work out how to post image direct in to thread. Find out if you have a water meter, where to find it and how to submit a meter reading.
It will be under a small metal or plastic cover in your driveway, garden or nearby footpath. Sometimes these can be a bit further down the road. The screwdriver is to lift the metal cover which you have done.
We were given a tool for opening the water meter cover when we moved in to our house in the early 90's. Check the cover is free to lift and free of any defects that may affect the lift. Start your message with the word read followed by your customer number and meter reading to 07781 474 715.
Use a flashlight to check for bees spiders snakes and other potential threats. Internal meters don't have a lid. To open the cover, you may need a pentagon socket wrench to remove a security bolt.
Insert the lifting keys into their slots and get a firm grip of their handles. Hold the water meter key such that the t portion is in your hand and the notched end is pointing down toward the water meter. Set the lid down to the right side of the meter box.
Vinyl covered handle for comfort. If your meter is outside you may need to lift the cover to access it. Locate the screws that hold the water meter cover on.
If your meter is indoors it can usually. You can log on or register for my account. Remove lid by prising open with pry bar and.
Most water meters are usually fitted outside near your outside stop tap. Remove the cover of the meter box. The majority of meters fitted indoors can usually be found under the kitchen sink by your inside stop valve.
The near end is purely a. Adopt a stable position, stand directly in front of the load, with feet about shoulder width apart. The diagram below shows the typical pipework at most homes and.
Insert a screwdriver or similar tool into one of the small holes in the cover and pry it up carefully. You may see your water meter with the. Your meter will have a unique serial number which is shown on your bill, so you need to check that it matches the number on the meter.
There should be two screws, one on the right and one on the left side of the cover. Remove the polystyrene cover if there is one. Use the screwdriver or stop tap key to lift the cover.
How to remove or bypass your meter (water). The screwdriver is to lift the metal cover, which you have done. The image below shows typical covers.
The wall cover should loosen up as the screws are removed. Put one hand on the cover and the other hand on the valve box and try to separate them. Get a firm grip of the pry bar handle.
Most water meters are fitted outside near your outside stop tap. The screwdriver is to lift the metal cover, which you have done. It is similar to your gas or electricity meter.
Set the cover aside somewhere nearby. It should only take a few minutes. You are looking for an 8 inch/20cm iron or plastic cover.
Locate the screws that hold the water meter cover on. Bend and unlock the knees and tighten the stomach muscles. Lid opener conveniently located on top handle.
Your outside stop valve is normally located under a cover on the path or the road. You can use a crescent wrench for this task, however if you have a meter box key , it will make your life a lot easier! This is common if your house is old and you share a supply with your neighbours.
Although flume has partnerships with water companies across the nation, some water companies have ordinances that limit your ability to open your meter box and/or install a. If you are still unable to find your meter, give us a call so we can advise how we can help. 2, a screwdriver, at the contact point, works.
Remember to put this back when you've taken the reading because it helps to protect against frost damage. Remove the cover of the meter box. Shaft and handle made of rebar.
Go to the boundary of your property. If your water meter is inside, it’s easy but you may need a torch. Sometimes your meter is located inside your home, usually under the kitchen sink or near the internal stop tap.
You get two tools in one. If your meter box has a hinged cover, simply pull back the lid. Call 0345 357 2401 and select the option 3 to leave a voicemail, you.
At the end of your road. If there's an inner metal lid, pull it up to see the meter face. 1, a pair of needle nosed pliers, work just fine.